Skip to content

How to measure a room and draw it in the room planner

All you need for a floor plan is a tape measure or a laser measure, a sheet of paper and about fifteen minutes per room.

Measuring

  1. Sketch. Draw the outline of the room on paper and number the walls in order, clockwise, starting with the wall with the door.

  2. Walls, inside. Measure each wall from corner to corner on the inside, just above the skirting. Measure a recess or a projection as separate lengths.

  3. Windows and doors. For each opening note the wall, the distance from the left corner to the edge of the opening, its width and its height. For a window, add how high its bottom edge is above the floor.

  4. Height. Measure from floor to ceiling in two or three places. Different results mean the floor or the ceiling is not level – note them down.

  5. Check. Measure both diagonals. In a rectangular room they are equal; a clear difference means the corners are not square.

In the planner

  1. Walls. Draw the walls in order, as on your sketch. The line you draw is the inside face of the wall, so you compare the dimensions on the drawing directly with your tape measure. A rectangular room is quicker with the wizard: “Room wizard” → “Rectangle” → “Width” and “Length” → “Add to the plan”. The wizard’s dimensions are the inside of the room.

  2. Windows and doors. Add windows and doors on the right walls. In the card, enter “Width” and “Distance from the corner” (from the left end of the wall to the edge of the opening). For a window add “Height” and “Window above the floor”, the height of its bottom edge; for a door, “Opening height”. For an existing opening, choose “Stays” or “To be replaced” under “In the renovation”.

  3. Wall height. In the “Area summary” panel, enter your measured “Wall height” (in feet, or in metres if you switched units). Without it the planner assumes 270 cm (8.86 ft).

  4. Room list. When the plan is ready, “Export the plan with its room list (PDF)” gives you an A3 sheet with the plan and a table of the rooms; nothing is sent anywhere.

Open the room planner (opens in a new tab)

Rectangular room? The wizard adds it with furniture right away: open the room wizard in the planner (opens in a new tab) (you choose the room type at the start)

Cost the whole job.

From a description or a photo of the floor plan, AI Renovation Calculator works out materials, fittings and labor for the entire renovation, with a PDF estimate ready to send.

See PRO calculators